JS twin shaft concrete mixer with hopper
Haomei supply high quality JS twin shaft concrete mixer with hopper which has volume of 500-4000 L, and the mixing capacity is 0.5 - 4m3/h. The concrete mixer with hopper usually used in skip type concrete batching plant, the cost is low and the cover space is small. People knows that the mixing efficiency of belt conveyor type concrete batching plant is higher than that of skip hopper type concrete batching plant and the equipment price is high. However, the mixing efficiency and quality of concrete mixer with hopper in skip concrete batch plant can be improved.
After selecting the concrete mixer to be used properly, do the following work during the use process, which will greatly improve the working efficiency of the concrete mixer:
1. Do a good job of lubrication
The concrete mixer should check the oil and circuit and control equipment of each lubrication place before daily work, and fill the oil as required. However, there are many local lubricants that need to be lubricated in a concrete mixer, the method and quantity of adding lubricants are different. Sometimes, new lubricants need to be replaced, so users should pay special attention.
2. Do a good job of cleaning
The concrete mixer must ensure the cleanliness of the body and remove dirt and obstacles from the body, especially the mixing blades or between the side blades and the inner wall of the tank.
3. Do a good job of inspection
① Before the daily work, it is necessary to check whether the transmission clutch and brake are flexible and reliable, whether the wire rope is damaged, whether the hopper track pulley is good, the surrounding is unobstructed and the lubrication of each part;
② The concrete mixer must implement the second-level leakage protection. After the power is turned on before going to work, it must be carefully inspected. It can only be used after passing the empty car test.
③ Before the concrete mixer with hopper is working daily, add water to the mixing drum for 1 to 2 seconds, and check the reliability of the clutch and brake device.